Editorial Policy & Corrections

Pot & Drip information page · About the publication

Pot & Drip publishes research-based guides for outdoor container and small-bed watering. We aim to explain choices and limitations, rather than declare a universal winner.

Evidence labels

  • Research-based: information checked against cited sources.
  • Worked example: invented numbers used to demonstrate a calculation.
  • Hands-on tested: reserved for future work backed by documented observations. No launch article uses this label.
  • Illustrative image: an AI-generated scene or an original explanatory graphic, not proof that a product was tested.

Product selection

We consider fit, documented specifications, compatibility, maintenance and use case. We do not invent ratings, customer reviews, test measurements or awards. An affiliate relationship must not determine a technical conclusion.

Updates and corrections

We plan to review buying-guide specifications quarterly and revisit other guides when equipment or source guidance changes. Dates reflect actual revisions, not an automatic freshness change. Use the contact page to identify a correction, including the article title and the relevant manufacturer source.

Scope

Equipment manuals and local backflow rules take precedence over a general article. Pot & Drip does not provide plumbing design approval.

Comments

Post a Comment

Popular posts from this blog

Drip Irrigation for Containers: A Practical Setup Guide

Image
Start with the pots, not the kit. A useful container watering system delivers enough water to each root ball without leaving your smallest pots saturated or your largest pots dry. Illustrative image; not evidence of product testing. In this guide Sketch a route you can actually maintain Choose the distribution line Put water where the roots can be used Build the faucet assembly from its manual Commission the system before trusting it What to buy—and what can wait The short answer Group pots with similar needs, measure the route from the outdoor faucet, choose compatible tubing and low-flow emitters, then verify delivery into cups before setting a timer. Soil checks determine the schedule; the timer only repeats it. Sketch a route you can actually maintain Mark the faucet, every pot, steps and walking routes on paper. Measure the tubing route rather than the straight-line distance. Include the climb to hanging baskets and enough accessible tubing to move a pot for cleaning. Avoid a lin...
Read more

Watering Plants While on Vacation: Rehearse the Setup

Image
The safest time to discover a loose dripper is while you are still home. Choose the watering method early enough to observe how it behaves through several normal cycles. Illustrative image; not evidence of product testing. In this guide Match the method to the location Group pots before setting the schedule Estimate a reservoir from measured consumption Run a departure rehearsal Make the backup easy to use On the day you leave Match the method to the location Outdoor faucet-fed systems, reservoir pumps, self-watering containers and wicks have different requirements. Begin with what the location supports: a suitable water source, appropriate drainage and a way to contain or detect a leak. Do not repurpose an outdoor-only kit inside a home. For outdoor pots near a faucet, a documented drip system and timer can be practical. Without a faucet, assess a purpose-designed reservoir system. Verify its lift height, supported outlet count and operating environment. A product described as "...
Read more

Gravity Drip Irrigation: Why Barrel Height Matters

Image
A full barrel stores water. It does not automatically provide the operating pressure required by a faucet-fed drip kit. Illustrative image; not evidence of product testing. In this guide Calculate height before buying components Do not assume "pressure compensating" means zero pressure Timers can be the hidden restriction Water quality still matters Support the water safely Test at the least favorable condition The useful relationship For fresh water, about 2.31 feet of vertical water height corresponds to 1 PSI of static pressure. Measure from the water surface to the outlet elevation-not from the bottom of the barrel. Calculate height before buying components A water surface 4.62 feet above an emitter provides about 2 PSI of theoretical static pressure. That is before losses through tubing, filters, valves and fittings. It is much less than many household faucet-fed components are designed around. As the barrel empties, the water surface drops and the available head decrea...
Read more